These Steps are for Desktops as well as Laptops User’s

Kindly Follow up these Easy Steps:-

Step # 1:-
Connect your Worldcall or Evo Wireless to your PC or Laptop. Then go to Network & sharing Center and click on Change Adapter Settings. There ull see your USB Broadband Connection as Shown in Picture Below.

Step # 2:-
After this, Right Click on this Connection and Click on Its properties and goto the Networking Tab, after that follow up the instructions Given in the Picture.

Step # 3:-
In this Step, Click on the Sharing Tab and Follow the Instructions in the Given Picture.

Step # 4:-
After the Completion of Third Step, in this Step you have to click on the Settings Button which is Located in the Sharing Tab. When Entering the Sharing tab Settings,ull see different Services Statements. Now follow the Instructions of this Step from the Picture.

Step # 5:-
In this Final Step you have to take Note of a few things…that i have Explained in the Picture below.

This Section is for Laptops User’s Only

Kindly Follow up these Easy Steps:-

Step # 1:-
Before Sharing your USB Broadband Connection Wirelessly on your Laptop, First you have to follow these Instruction Carefully, goto Network and Sharing Center and Click on the Manage Wireless Networks. You can also follow these instruction in the Picture Below.

Step # 2:-
After clicking the Manage Wireless Networks, a new window will open, there you have to click on Add button after clicking it another window will open. On that window Click on Add or Creat an AD-HOC Network. You can follow the Steps from this Picture.

Step # 3:-
After Clicking on Create an AD-HOC Network, a new window will open you just need to press next on that window. Here is a Picture of it.

Step # 4:-
In this Step you have to put some Info in the Blank Spaces given. Like in Network Name you have to put your Desired Network Name, In Security Type Select WEP, and in Security Key type in your Desired Key. After that Tick Mark the Save This Network Option, and then hit Next Button. You can follow these all steps from the Picture given below.

Step # 5:-
Congratulations your Wireless Connection is Created and it is Ready for use.

Step # 6:-
After making Wireless Network Connection. In this Step you have to Follow up all the Instructions that i have mentioned at the beginning of this Thread. Follow all the Instructions Carefully. Here is a Picture in Which the USb Device is Shared and an Ip Address has been given to your Wireless LAN.

Step # 7:-
This Step is Very important for Laptop User’s because, when you are sharing your USB Device this little option should be kept in mind. Just Follow the instructions given in the Picture.

In this process you can also use a tool named Net Limiter which allows you to limit the net speed or you may say net bandwidth according to your requirements.

This Process Works Perfectly On These Operating Systems:

Windows Xp, Windows Vista 32 and 64-bit, Windows 7 32 and 64-bit

Enjoy

This Process is for those who OWN HTC Android Phones & other Cell Phones

Step # 1:-

First you need Virtual Router Manager software that will convert your laptop into virtual access point which is both secure using WPA2 (the most secure wireless encryption) and much easier to setup . Just put your own SSID which is any name like and then put a 13 digit password and then click start virtual router button.

Step # 2:-

Now go to settings in HTC and then turn on WIFI , your mobile will quickly find all available networks including the one you have just created or named. Now just add it and put password to enjoy high speed internet sharing

Virtual Router Manager Software Link

Download Virtual Router Manager

Note:Virtual Router is actually a free, open source software based router for PCs running Windows 7. With this software you can share any internet connection (Wifi, Local Area Network, Cable Modem, Dial-up, Cellular) with any Wifi device (Laptop, Smart Phone, iPod Touch, iPhone, Android Phone, Zune, Netbook, wireless printer).

Source: PakGamers